Electrocution Hazards

Focus Four — from the Anvil & Co. course library. What you will learn: • Recognize overhead power lines, damaged cords and missing ground faults. • Keep safe clearance from power lines. • Use GFCIs and lockout/tagout. Key points: • Assume every line is energized. For cranes and equipment, keep at least 20 feet from lines up to 350 kV unless the utility confirms otherwise (29 CFR 1926 Subpart CC). • Use GFCI protection on temporary power, or an assured equipment grounding program. • Inspect cords daily. Remove cords with cut jackets, missing ground pins or taped splices. • Lockout/tagout: shut off, lock, tag and test for zero energy before working on equipment. • Only qualified persons work on energized parts. Keep ladders non-conductive near electricity. Scenario: A dump truck needs to raise its bed under an overhead line next to the stockpile. What steps come first?